Dediprog SF600 PLUS SPI Flash IC燒錄器 在線編程器

Dediprog SF600 PLUS SPI Flash IC燒錄器 在線編程器

型號︰SF600 PLUS

品牌︰岱譜

原產地︰臺灣 中國

單價︰CNY ¥ 3500 / 件

最少訂量︰1 件

現在查詢

產品描述

Highlights

  • USB High speed and high SPI performance, support up to 2Gb SPI Flash
  • In-Circuit Programming: Program on board SPI Flash
  • Off-line Programming: Program SPI Flash in the socket
  • Start button feature: Able to Batch in the USB mode
  • Standalone mode: Support Start button programming and IO Port programming.
  • Program two Serial Flash memories
  • Signal conflict protections
  • Multi-Programmers Capability through USB
  • Support 1.8V low voltage IC
  • Support Windows 2003 and above
  • Support both 32 and 64 bit OS
  • Support 1 CS pin

 

High performance (25MHz, Single IO):

USB Mode Reference IC Density  (Program + Verify)
Memory size W25X80VSSIG 8Mb 9s
W25Q16VSSIG 16Mb 11.6s
W25Q32VSSIG 32Mb 12.6s
W25Q64FVSSIG 64Mb 31s
W25Q128BVFIG 128Mb 61.7s
W25Q256FVFIG 256Mb 89.2s
S25FL512SAGMFI011 512Mb 147.4s

*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.

 

Hardware

SF600Plus is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600Plus 2x10 header pin out. DediProg also provides the SF600Plus ISP Cable which is used to connect the programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600PlusISP Cable 2x6 pin out.

 

Table 1: SF600Plus ISP Header Pin Out (2x10)

1 Vpp CS2 2
3 CS1 Vcc 4
5 MISO/DQ1 Hold/DQ3 6
7 Wp/DQ2 CLK 8
9 GND MOSI/DQ0 10
11 NC Reset/IO3 12
13 NC NC 14
15 NC NC 16
17 NC NC 18
19 GPIO1 GPIO2 20

 

Table 2: ISP Cable Connector Pin Out (2x6)

1 Vpp CS2 2
3 CS1 Vcc 4
5 MISO/DQ1 Hold/DQ3 6
7 Wp/DQ2 CLK 8
9 GND MOSI/DQ0 10
11 NC Reset 12

付款方式︰ paypal

產品圖片