|
ALL-200 Universal Device Programmer is designed to provide high quality yet compact size programming platform for IC programming at development / engineering stage.
ALL-200 extremely high freq. core circuit design significantly cut down programming time of high density memory products.
ALL-200 has 56 sets of Precise Universal Pin Driver to provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.
ALL-200 works with dedicated Socket Board (HD-xxx-xxx) per IC package type. This eliminates the requirement of additional socket adaptor / converter which might impact programming yield due to poor contact and/or signal noise
- Excellent performance
ALL-200 extremely high freq. core circuit design significantly cut down programming time of high density memory products. Precise Universal Pin Drivers provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.
- Wide range of IC coverage
ALL-200 supports wide range of IC products including EPROM, EEPROM, Serial EE, SPI memory, FLASH, MPU/MCU product types and DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA package types.
- Easy to setup & operate
ALL-200 setup and operation can be done easily by connecting Device Programmer to PC with Windows 2000/XP/Server 2003/Vista/Windows7/Windows 8 O.S. through USB port, load data file or read Master IC, then select functional options (Program,Verify,Auto…etc.) to start programming.
- Direct-mount Socket Board
ALL-200 works with dedicated Socket Board (HD-xxx-xxx) per IC package type. This eliminates the requirement of additional socket adaptor / converter which might impact programming yield due to poor contact and/or signal noise.
- High expansion flexibilityFrom development / engineering stage using ALL-200 single-site programming through limited production stage using ALL-200G multi-site programming to mass production stage using AT3-300 series automated programming, high expansion flexibility of programming platform is well prepared.
- Timely software supportThe supporting software is updated weekly on HI-LO web site for checking / retrieving through Internet. Programming of new products will not be neglected after purchasing.
- World wide serviceDistribution channel covers 35 countries worldwide, all inquiries / problems can be served easily and timely.
- Core controller
16 bits high freq. core control circuit with high performance FPGA & CPLD
- Key functions
Load File, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect / Unprotect, Edit, Function Configuration, Self Test.
- Support devices
IC types : EPROM, EEPROM, Serial EE, SPI memory, FLASH, MPU/MCU…etc.
IC packages : DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA…etc.
IC leads : 8 pins ~ 300 pins
- Device contact
Dedicated Socket Board ( HD-xxx-xxx ) per IC package type
- I/O channels
56 sets Precise Universal Pin Drive
Provide high quality programming signals for high speed low power (1.8V) devices
- Data transfer interface
Transfer port : USB x 1
Transfer speed : USB1.1 : 12 Mb/sec. USB2.0 : 480 Mb/sec.
- Host computer requirement
An Intel or compatible processor with 512MB of RAM
At least one USB port is available
50MB free hard disk space
Windows 2000 / XP / Server 2003 / Vista/ Windows 7/ Windows 8/ Windows 10 or later rev. operation system
CD ROM / DVD ROM Drive
- Power
Power source : AC 100 V ～ 240 V 50 Hz ～ 60 Hz
Power consumption : 50 W
- Operation temperature
0 ℃ ~ 40 ℃ (32 ℉~ 105 ℉)
- Dimension
W x D x H 130mm x 170mm x 40mm
- Weight
~ 0.82 kg (Base Unit) ~ 0.86 kg (with socket board on top)
- Certification
CE certified
|
|
|
|
Product Image
|
